Box Hedge Caterpillar
I went out to trim our hedge today and I noticed a lot of the small box hedge at the front of
Author: Christian
Black & Decker WM625 Workmate Restoration Part 8 – Finally Reassembled
After checking the blue paint daily I am satisfied that its now hard enough to attempt [careful] reassembly. It was pretty much
Black & Decker Workmate Restoration Part 7 – Top Coating in blue
The primer dried off really quickly and I decided to hit it with the top coat the next day as the weather
Black & Decker Workmate Restoration Part 6 – Priming with Paint
The weather here in March and April of 2021 has been quite unpredictable and left very little opportunity to actually apply some
Black and Decker Workmate Restoration Part 5 – Stripping more paint
Having painstakingly stripped back most of the paint on the workmate using a wire brush in a drill, I noticed that the
Parkinsons Perfect Vise Model F No 7 part 2
Started to strip down the vice, which is much simpler than I thought. Off come the jaws with two bolts each, these
Parkinson Perfect Vice Model F No 7
I picked up this vintage vice which looks like it was made in the early 1900’s for £40 off of Facebook Marketplace
Bought another WM625 Black and Decker Workmate
So my obsession with obtaining these excellent vintage Black & Decker workmates continues much to my wife’s annoyance. I was flicking through
Black & Decker Workmate Restoration Part 4 – Paint Stripping
The next stage in my Black & Decker Workmate WM625 restoration is to strip off the old paint and rust. The aluminium
Black and Decker Workmate Restoration Part 3 – The Stripdown
I found a bit of time and braved the freezing cold garage to start the stripdown of my Black & Decker Workmate